Revel Salon User Manual download pdf (Page 6)

WARNING

Figure 3. Unpacking a REVEL

ULTIMA STUDIO carton.

UNPACKING

IMPORTANT! Do not attempt to lift a REVEL ULTIMA

STUDIO from its packing carton alone – use at least two strong

people to unpack the product properly. To avoid injury, use

extreme care during unpacking. Always stand as straight as pos-

sible and use your leg muscles to lift the REVEL ULTIMA

STUDIO. Do not lift it while bending from the waist.

Each REVEL ULTIMA STUDIO is packed in its own carton with

a shipping weight of 164 pounds (74.5 kg). To avoid personal

injury and possible product damage, we strongly urge you to enlist

additional help before unpacking either carton.

To unpack a loudspeaker, perform the following steps:

1. Stand a REVEL ULTIMA STUDIO in an upright position.

2. Carefully remove all staples from rear flaps. Open the flaps and

tilt the unit forward so that the bottom flap can be positioned

under the carton, as shown in Figure 3.

3. Lay the unit on its back with all flaps open. Lift carton off the

unit and set it aside.

4. Place the REVEL ULTIMA STUDIO in an upright position

and then remove the four (4) foam packing strips from the

sides, as shown in Figure 4 (on the next page).

5. Tilt the cabinet forward and remove bottom rear end pad, using

caution to avoid touching the front tweeter or midrange.

6. Tilt the cabinet backward and remove bottom front end pad,

using caution to avoid touching the front tweeter or midrange.

REVEL ULTIMA STUDIO

Owner’s Manual

Tilt carton forward and

tuck bottom flap under

This end up

Front

This end up

Rear

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

No comments

Revel Salon User Manual Page 6